Pillars Bundle with R56 Curved Tracks

110,49 €

1 / 30

# Pillars Bundle with R56 Curved Tracks

## Product information

110,49 €

Freshly printed · ships in 3–4 days

We print this part fresh for you in our own workshop. It ships in 3–4 days, and there's nothing else you need to do.

## Color

Dark Bluish Gray

No other color versions

## Specifications

R56 Radius

Regular Gauge

3D Printed 164 parts

Injection molded 24 parts

An economically priced superset of 10 highest pillar supports and 20 incline pillar supports and 24 R56 curves to build a fully working bridge like shown in the video.

Bundled products:

- 1x [Highest Pillars](https://trixbrix.eu/en_US/p/Highest-Pillars/124)
- 2x [Incline Pillars](https://trixbrix.eu/en_US/p/Incline-Pillars/123)
- 3x [R56 Curved Track Set, 8 Sections, half Circle](https://trixbrix.eu/en_US/p/Curved-Track-R56%2C-8x%2C-Half-Circle/295)

Take your layout to a whole new level of fun and entertainment with Trixbrix Bridges and incline sets. Build elevated tracks and underpasses.

There are two types of bridges available:

1. The **Pillars bridge** has one centered column per support and is suitable for use with R56 curves.
2. The **Supports Bridge** has 2 columns per support on the outersides allowing you to also drive trains not only perpendicular underneath the tracks but also in the same direction as the trains above. The set shown here is a **Pillars** type bridge.

The custom designed cross leg holds train tracks tight and firmly in place. The cross leg is freely rotatable so tracks are always perfectly connected to the bridge.

- Quickly and effortlessly build bridges
- Create underpasses without collisions
- Add separately available Double Straight Tracks to create longer bridges.
- Contains 10 segments in total
- Build a full u-turn using 9 segments and 8 curved tracks
- Each segment consists of 1 pillar and 1 adjustable cross arm, tracks sold separately
- 10 segments span 11 train tracks = 176 studs = 140 cm
- The highest pillar, including the cross-arm, is 121.6mm high (38 plates)
- Vertical clearance of 11,8 cm (fits every LEGO® train)
- Dark Bluish Gray color (same as orginal).
- Fully compatible with LEGO® tracks
- All heights are multiples of 3.2mm (one LEGO® plate height)

In case your train has difficulty climbing the incline, there are a few things you might check:

1. Fresh batteries - should be non-rechargeable because accus have lower voltage which translates to lower torque and speed.
2. Give the train a bit of speed before making the incline.
3. Make sure the small rubber bands on the motorized wheels are present (they are by default on all LEGO® trains).
4. If you have some custom trains or too many wagons, you might need to make them shorter or lighter in some way.

In general, the incline angle is a compromise between the train's ability to climb and the overall floor space needed.

 

## This set contains

![Curved Track R56](https://trixbrix.eu/rails/active_storage/representations/redirect/eyJfcmFpbHMiOnsiZGF0YSI6MTkwOTI1LCJwdXIiOiJibG9iX2lkIn19--63e902cd5283de4f8e464d6eed860e5c27797b17/eyJfcmFpbHMiOnsiZGF0YSI6eyJmb3JtYXQiOiJ3ZWJwIiwicmVzaXplX3RvX2xpbWl0IjpbODAwLDgwMF0sInNhdmVyIjp7InF1YWxpdHkiOjg4fX0sInB1ciI6InZhcmlhdGlvbiJ9fQ==--9611decc1ff01912abcca0815ffb500fe34a323f/32Obszar-20roboczy-20118_36_4@350x-100.jpg?locale=en)

### [Curved Track R56](https://trixbrix.eu/en/p/track/curved-tracks/curved-track-r56/9926-curved-track-r56)

In stock

3,49 €